 |
|
 |
PRODUCT |
 |
|
 |
VisionStat™ Triple Side View Camera System (7.0 Wired Monitor) |
 |
|
|
|
|
Lane Departure with Greater Visibility |
Triple Side View Camera System
The Triple Camera Lane View System is designed for applications where a commercial truck, bus, delivery van or vehicle pulling a trailer requires clear coverage of blind spots. Central to this camera system are a pair of low profile, infrared, industrial grade, angle modifiable side mount cameras. They can be adjusted similar to a mirror for best driver visibility and configured so that the image appears on the screen when the driver uses the Left or Right Turn Signal. Additionally, the display indicates the camera position being viewed by the driver as Left, Right or Backward (in the case of the included rear view camera).
Also included is a third low light camera optimized for rear vision that contains an embedded microphone. It can be configured to switch on automatically when the vehicle is placed in reverse, simultaneously turning on the audio sound capability. Additionally, the rear view camera can be installed for continuous monitoring of what`s behind the vehicle or trailer while driving. This 18 infrared LED camera is designed to improve visibility in low light conditions (via a built in sensor) that automatically adjusts for night vision. All three rugged high-resolution image CCD cameras are constructed of a metal alloy shell, designed to be waterproof for vehicle applications.
For ease of viewing, the system contains a high quality 7" TFT LCD Color Monitor that is easily installed by mounting on the dash, in the dash or on the windshield (utilizes adjustable universal mounts). For added safety and convenience, the monitor contains an audio speaker that can be utilized with either of the rear view cameras. Whenever the rear view camera is enabled, the built in microphone aids the driver by providing access to sounds heard in the back of the vehicle. The volume can be adjusted on the monitor`s front panel or via the included remote control. |
|
|
|
Lane-View Triple Camera System Featured Components |
7" COLOR TFT LCD Monitor
(Model Number: MA-LCDS-7.0)
- Loudspeaker: one 4.0cm round loudspeaker, Audio output: 1W
- Connections: Earphone jack, audio / video (AV) input jack, power supply
- Camera Interface: 13-pin camera connector
- Power Supply: automobile battery(12-32V), Power consumption: ~ 12W
- Outer Dimensions: 182mm(W) x 122mm(H) x 26(T) without back shield
98mm(W) x 138mm(H) x 31mm(T) with back shield
- Dot Pitch: 0.107(H) x 0.370(V), Resolution: 480 x 3(RGB) x 234
- Contrast: 300:1, Brightness: 350cd/m²
- Viewing angle: U: 40 / D: 60, R/L: 60
- Operating temperature: -20 ~ +70°C, RH90%
- Storage temperature: -30 ~ +80°C, RH90%
Side Mount Color CCD Cameras
Model Number: MA-SMS-IR9
Also available in SIlver and White - Consult Factory
- 1/4" CCD Color Cameras with 6 Infrared LED`s
- Effective Pixels: 512 x 582 pixels / 512 x 492 pixels
- Sensing Area: 3.6mm x 2.7mm
- Scanning System: 2:1Interlace
- Sync. System: Internal
- Resolution: 420TV lines
- Minimum Illumination: 0 Lux/F1.2 with IR
- Horizontal Sync. Frequency: 15.625KHz / 15.734KHz
- Vertical Sync. Frequency: 50Hz / 60Hz
- Video Output: 1.0vp-p, 75Ohm
- Gamma Consumption: 0.45
- AGC: Auto, White Balance: Auto, BLC: Auto
- S/N Ratio: Better than 48dB
- Electronic Shutter: 1/60(NTSC) / 1/50(PAL) ~ 1/10,000 Seconds
- Current Consumption: Max. 100mA, Power Supply: DC12V
- Operating Temperature: -20°C~70°C , RH95% MAX
- Storage Temperature: -40°C~85°C, RH95% MAX
- Lens: 2.1mm, Lens Angle: 150 degrees
1/3" CCD Color Backing Camera
(Model Number: MA-BCS-IR18)
- Waterproof & Weather Resistant Housing for Outdoor Use, Rated IP67
- Night Vision with 28 Infrared LED`s (distance: approx. 20m)
- Day/night Sensor for Automatic Adjustment
- Effective Pixels: 512 x 582 pixels / 512 x 492 pixels
- Sensing Area: 4.9mm x 3.7mm
- Scanning System: 2:1 Interlace, Sync. System: Internal
- Resolution: 420TV lines
- Horizontal Sync. Frequency: 15.625KHz / 15.734KHz
- Vertical Sync. Frequency: 50Hz / 60Hz
- Minimum Illumination: 0 Lux/F1.2 with IR
- Microphone: Built-in
- Video Output: 1.0vp-p, 75Ohm Gamma
- Consumption: 0.45
- AGC: Auto, White Balance: Auto, BLC: Auto
- S/N Ratio: Better than 48dB
- Electronic Shutter: 1/60(NTSC) / 1/50(PAL) ~ 1/10,000 Seconds
- Power Supply: DC12V, Current Consumption: Max 300mA
- Operating Temperature: - 0°C ~ 70°C, RH 95% MAX
- Storage Temperature: - 40°C ~ 80°C, RH 95% MAX
- Lens: f = 2.8mm, F = 2.0, Lens Angle: 120 degree
Circular Metal Waterproof Interconnects
- Cameras utilize our standard 4-conductor interface cable system
- Single cable carries Power, Ground, Video and Audio signals to Cameras
- Threaded Mini DINN connectors are waterproof
- Includes watertight rubber jacket (slides over connectors)
- Internal rubber sealing ring
|
|
|
|
Comes Complete with the Following: |
- 7" Color LCD Display: for Left, Right, Reverse Camera (1 ea.)
Model Number: MA-LCDS-7.0
- Reversing Camera: 1/3" CCD Color w/Audio & 18 Infrared LED`s (1 ea.)
Model Number: MA-BCS-IR18
- Side View Cameras: 1/4" CCD Color, Low Profile, Night Vision (2ea.)
Model Number: MA-SMS-IR9
- Triple Camera Interface Harness (1ea.)
- 32 Ft (10M) Side View Camera Cables (2 ea.)
- 69 Ft (21M) Reversing Camera Cable (1 ea.)
- Wireless Remote Control (1 ea.)
- LCD Monitor Mounting Accessories:
A) In-Dash Mounting Frame (1 ea.)
B) L-Bracket - Dash or Ceiling Mount with Angle Adjustment (1 ea.)
C) Dash or Windshield Mounting Stand (1 ea.) |
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
